General Products |
| Lightweight Pumpable 60 |
Description |
Lightweight Pumpable 60 is a proprietary, cement free, lightweight pumpable refractory product intended for application by pouring, pumping, or pneumatic shotcreting. For pouring/pumping placement, Lightweight Pumpable 60 is supplied as a two component system, including the colloidal silica binder plus Metset AC-30, a special chemical accelerant utilized to induce rapid material setting. The patented colloidal silica binder system provides a very fluid, self leveling refractory slurry that allows rapid material placement by pumping onto either hot or cold substrates, or by shotcreting, utilizing the accelerant that is injected into the pneumatic slurry propellent, that results in minimal rebound waste.
Lightweight Pumpable 60 exhibits excellent adhesion characteristics
to refractory and metal substrates and develops
strong bonding to itself or to other refractories with no laminations,
even if applied during multiple, independent placements,
regardless of the time intervals between placements.
After heat up, Lightweight Pumpable 60 forms very strong
bonding to virtually all undeteriorated refractory materials and
requires minimal dry out time, which reduces component downtime and increases availability and in service, exhibits
excellent insulating and exceptional strength properties. |
Application |
Lightweight Pumpable 60 is recommended for new lightweight
refractory linings or hot or cold repair or replenishment
of existing lightweight refractory linings, including in
the blast furnace and similar metallurgical process vessel
applications, whenever a lightweight, insulating castable/
pumpable/shotcretable product is required. |
| Lightweight Pumpable 80 |
Description |
Lightweight Pumpable 80 is a proprietary, cement free, lightweight
pumpable refractory product intended for application
by pouring, pumping or pneumatic shotcreting. For pouring/
pumping placement, Lightweight Pumpable 80 is supplied
as a two component system, including a colloidal silica
binder, or for application by shotcreting, is supplied as a
three component system, including the colloidal silica binder
plus Metset AC-30, a special chemical accelerant utilized to
induce rapid material setting. The patented colloidal silica
binder system provides a very fluid, self leveling refractory
slurry that allows rapid material placement by pumping onto
either hot or cold substrates, or by shotcreting, utilizing the
accelerant that is injected into the pneumatic slurry propellant,
that results in minimal rebound waste.
Lightweight Pumpable 80 exhibits excellent adhesion characteristics
to refractory and metal substrates and develops
strong bonding to itself or to other refractories with no laminations,
even if applied during multiple, independent placements,
regardless of the time intervals between placements.
After heat up, Lightweight Pumpable 80 forms very strong
bonding to virtually all undeteriorated refractory materials and
requires minimal dry out time, which reduces component
downtime and increases availability and in service, exhibits
exceptional strength properties. |
Application |
Lightweight Pumpable 80 is recommended for new lightweight
refractory linings or hot or cold repair or replenishment
of existing lightweight refractory linings, including in
the blast furnace and similar metallurgical process vessel
applications, whenever a lightweight castable/pumpable/
shotcretable product is required. |
| Metpump ASX 50 BU |
Description |
Metpump ASX 50 BU is a cement free alumino-silicate pumpable material that is supplied as a two part system including a liquid colloidal silica binder. Metpump ASX 50 BU has excellent high temperature properties including hot strength, thermal shock resistance, and resistance to alkali attack. Metpump ASX 50 BU bonds well to existing refractory linings. The colloidal silica binder system permits easy placement by casting or pumping and requires minimal dryout times, increasing component availability. |
Application |
Metpump ASX 50 BU is recommended as a backup lining for a variety of furnace and metallurgical process applications, wherever fast installation and long term volume stability are required. |
| Metpump ASX LW |
Description |
Metpump ASX LW is a cement free high strength pumpable material that is supplied as a two part system including a unique liquid colloidal silica binder. Metpump ASX LW has excellent strength and abrasion resistance. The colloidal silica binder system permits easy placement by casting or pumping and permits excellent bonding to existing refractory linings. |
Application |
Metpump ASX LW is recommended for applications where high abrasion resistance and insulation are the key performance requirements. |
| Metpump CL SC |
Description |
Metpump CL SC is a cement free alumino-silicate pumpable or shotcrete material that is supplied as a multiple part system including a liquid colloidal silica binder and a liquid accelerant for rapid material setting. Metpump CL SC has high hot and cold strengths and excellent resistance to alkali and acid attack. The colloidal silica binder system permits easy placement by casting, pumping or shotcreting and requires minimal dryout time increasing vessel availability. |
Application |
Metpump CL SC is recommended for fluidized bed reactors, waste gas boilers, scrubbers and chemical plant ductwork associated with high temperature corrosive atmospheres. |
| Metpump CL2 SC |
Description |
Metpump CL2 SC is a cement free, high purity fused silica pumpable material that is supplied as a multiple component system including a liquid colloidal silica binder and a liquid accelerant for rapid material setting. Metpump CL2 SC exhibits excellent strength, thermal shock resistance, acid resistance and resistance to alkali attack. The colloidal silica binder system permits easy placement by casting, pumping or shotcreting and requires minimal dryout. |
Application |
Metpump CL2 SC is recommended for fluidized bed reactors, waste gas boilers, scrubbers and chemical plant ductwork associated with high temperature corrosive atmospheres. |
| Metpump EF SC |
Description |
Metpump EF SC is a cement free high alumina and silicon carbide shotcrete material that is supplied as a multiple component system including a unique liquid colloidal silica binder and an accelerant for rapid material setting. Metpump EF SC has excellent resistance to metals and slags and has outstanding high temperature properties including hot strength and thermal shock resistance. The patented colloidal silica binder system permits easy placement by casting, pumping or shotcreting and requires minimal dryout time |
Application |
Metpump EF SC is recommended for repair of steel and iron ladles, runners, cyclone boilers and other high alumina linings. |
| Metpump IPSX SC +10 |
Description |
Metpump IPSX SC + 10 is a cement free high alumina and silicon carbide shotcrete material that is supplied as a multiple component system including a liquid colloidal silica binder and a liquid accelerant for rapid material setting. Metpump IPSX SC + 10 has excellent volume stability, thermal shock resistance, abrasion resistance and high temperature strength. The colloidal silica binder system permits easy placement by casting, pumping or shotcreting and requires minimal dryout time increasing component availability. |
Application |
Metpump IPSX SC + 10 is recommended for hot or cold shotcrete repair of high alumina linings that require good thermal shock and abrasion resistance. |
| |
Top |
